Odd From Insert Machine
EIM Sreies
EIM is an economical model developed for small batches and multiple varieties.
When replacing products, because many incoming materials cannot be determined, we use EIM series models to easily to handle common parts, easy to operate, low investment, and high returns.
Video
PRODUCT FEATURE
Offline Programming
Plug-in programming software can be installed on any computer outside for programming.
Data Sharing
The program data of the machine and the production data (PCB size, component data, coordinates, etc.) can be shared to other device calls.
Intelligent Calibration of Precision
The equipment can improve the accuracy through a variety of precision algorithms and intelligent correction of error of production data analysis equipment.
1.0≤CPK≤1.67
Through the standard CPK program, the accuracy proof process, the CPK test result are between 1.0 and 1.67.
Multiple Algorithm For Identification Of Odd Form Components
The results of corrective analysis through multiple recognition components.
Increase insertion rate by 5 %
Reduction of production losses by 5 %
OPTIONS FEATURE
Note: some models can be equipped with components lead bent to realize automatic bent lead after component plug-in, so as to prevent the floating phenomenon during component welding; The lead diameter of the bent foot shall be less than 1.0mm, and the length of the leaking lead shall be not less than 2mm (the specific size shall be subject to the final design).
Lead Clinching Unit
(no direction, angle)
(with specified angle))
As shown in the figure, there are 4 types of outward bending, inner bending, circular bending and 2 turns bending.
Some models are applicable. Please confirm with the local sales representative before purchasing.
Feeder
Tape Feeder
Radial Tape Feeder
Axial Tape Feeder
Radial Tape 90 Feeder
Tray Feeder
Tube Feeder
Bowl Feeder
Double Layer Bowl Feeder
Identify Polarity Vibrant Bowl Feeder
Component Application
CONTACT